© 2014 Cygnus Automotive Limited
69
DISABLE PIN
PRESS SELECT TO
SET THE USER
TOTALS PIN
Prompt to set the Totals User PIN. 5.5.4
PULS Pulse Check 5.7.1
READY Message displayed when the meter is connected to a
Tariff Programming unit. Shows that the meter is
waiting for a command.
REORGANISING
TOTALS
Scrolling message displayed when a “Totals
Reorganisation” is taking place.
6.9
SAT Saturday
SEP September
SET “Set” indicates that you can set an option. Used in
various menu entries.
SOFT/TPU Tariff Programming unit used to program the
meter’s software.
5.6.5
SOFTWRINFO Software Information sub-menu 5.6.5
SOUND Sounder On/Off Info menu entry. 5.5.2
SPEED Speed Alarms 5.7.4
SrNo Serial Number 5.6.1
SUN Sunday
THE TOTALS ARE
NOT READABLE -
PRESS SELECT TO
INITIALISE THE
TOTALS
An attempt has been made to read the totals.
However, the totals information is not readable. In
order to use the meter you need to re-format the
Totals memory. Press SELECT.
6.6
THE TOTALS ARE
NOT READABLE
AS THERE IS NO
TARIFF
INSTALLED -
In order to understand the totals information, the
MR400 needs to have a tariff installed. This is
because the tariff defines which items are stored
and where (e.g.: Fare, Extras etc.). You need to get
a dealer to install a tariff.
6.4
THE USER
DISABLE PIN HAS
ALREADY BEEN
SET -
Once a user PIN has been set, you cannot change it. 5.5.4
THE USER TOTALS
PIN HAS ALREADY
BEEN SET
Once a user PIN has been set, you cannot change it. 5.5.4
THU Thursday
TIME OPTS Time Options Info Menu entry. 5.4
TIP A tip or gratuity is being added. 8.66
TOTALSCONF Totals Configuration Info Menu entry. 5.8
TRF “Tariff”
TRF/TPU Tariff Programming Unit used to program the Tariff
in the MR400.
5.6.5
To Next Page
Loading...
Need help?
General
