D-Link DCS-100 User Manual

21D-Link D-ViewCam User Manual
Section 3 - Conguration
Information Window
Displays the date, time, free disk space, IP Camera bitrate, customized text and network utilization.
PTZ Camera Control
Control the movement of PTZ (pan/tilt/zoom) cameras. With cameras that support PTZ control, you can move, zoom, patrol, adjust the
focus, and set preset points of the cameras.
Preset/Go
Adjust the camera view until you are satised. Click on the Set icon and set up the view as the preset point 01. Adjust the camera view
again and set up the preset point 02. Repeat the process until all preset points are set. You can assign a custom name to each preset.
Click on the Go icon and view the result of your setting.
Note: To adjust the speed settings of PTZ camera, go to General Setting and Utilities > Setting > PTZ Cong.
Zoom
Click on the + sign to zoom in or click the – sign to zoom out.
Focus
You can select to have the camera focused near or far. To focus near means objects that are closer will be clearer than the objects that
are further away. On contrast, to focus far means objects that are further will be clearer than the objects that are closer. Click on the Focus
icon and select auto focus if you want the system to decide the focus point for you.
Patrol
Go to Patrol > Set Patrol to obtain the Patrol Setup dialog. From the left window, select the camera(s) that you would like to have in the
patrol group. Align the cameras in order in the right window and adjust the time. Rename the group name if you want. After completing
the setup, check the Active option, and then click OK.
You can setup up to four groups of auto patrol. To start or stop, click on the Patrol icon in the Main Console, and select Start Patrol or
Stop Patrol.

D-Link DCS-100 Specifications

General

Brand	D-Link
Model	DCS-100
Category	Software
Language	English