D-Link DCS-100 User Manual

43D-Link D-ViewCam User Manual
Section 3 - Conguration
Client List
Client Count: Show the amount of channels that are connected.
Kill Client: Highlight an IP address and click on the Kill Client button to block the client from your client list.
Kill All Clients: Click on this button to block all the clients logging to your system.
Service
Server Status: Click on Start/Stop to turn on/off the server.
Options: Adjust the setting only when the server is stopped.
Port: Assign a port for the clients to connect to your system via Remote Live Viewer. Default port is 5150.
Maximum Connections: Number of connections that are allowed to connect to the system. Default is 64 channels and
maximum is 64, one camera video counts as one connection.
Use Default Web Server: Activate the Web server by checking this box. Clients will be able to watch live video via Internet
Explorer. The port for live streaming server is 80 by default.
Save Log: Save the current log information to your computer.
Enable Audio: Select this option to enable the audio transmission along with video stream.

D-Link DCS-100 Specifications

General

Brand	D-Link
Model	DCS-100
Category	Software
Language	English