EasyManuals Logo

D-Link DCS-5220 User Manual

D-Link DCS-5220
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10D-Link DCS-5220 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link Wireless PTZ Network Camera lets you access your network using a wireless connection from virtually
anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and
location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical
ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link adapter and other network devices to a
minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position
your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits
a signal even if the phone in not in use.

Other manuals for D-Link DCS-5220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-5220 and is the answer not in the manual?

D-Link DCS-5220 Specifications

Operating Environment IconOperating Environment
operating temperature0˚ to 40˚C (32˚- 104˚F)
storage temperature-40˚ to 70˚C (-14˚ - 158˚F)
humidityMax. 95% RH
Power IconPower
external power supply12V DC 1.5A
power consumption4.8 Watts
Camera Specifications IconCamera Specifications
cmos sensor1/4”
minimum illumination0.5 Lux @ F2.0
viewing angle horizontal270º
viewing angle vertical90º
Video and Audio IconVideo and Audio
video resolution at 160x120Up to 30fps
video resolution at 176x144Up to 30fps
video resolution at 320x240Up to 30fps
video resolution at 640x480Up to 30fps
audio bitrate AAC16kbps~128kbps
audio bitrate GSM-AMR4.75kbps~12.2kbps
Weight and Dimensions IconWeight and Dimensions
width4.1”
height4.4”
depth4.3”
item weight0.7 lbs
packaging weight2.9 lbs

Related product manuals