61D-Link DCS-5220 User Manual
Section 3 - Configuration
Recording entry
name:
Enable this
recording:
Priority:
Source:
Recording
schedule:
Recording
settings:
Destination:
Total cycling
recording size
Size of each le
for recording:
File Name
Prex:
The unique name of the entry.
Select this to enable the recording function.
Set the priority for this entry. The entry with a higher
priority value will be executed rst.
The source of stream.
Scheduling the recording entry.
Conguring the setting for the recording.
Select the folder where will store the recording
le.
Please input a HDD volume between 1MB and
200GB for recording space. The recording data will
replace the oldest one when total recording size exceeds this value. For example, if each recording le is 6MB, and the total
cycling recording size is 600MB, then the camera will record 100 les to the specied location (folder) and then will delete
the oldest le and create new le for cycling recording.
Please note that if the HDD empty space is not enough, the recording will stop. Before you setup this option please make
sure your HDD has enough space and it is better to not save other les in the same folder as recording les.
File size for each recording le. You may input the value in the range of 200-6000.
The prex name will be added on the le name of the recording le(s).
Add Recording
Here you can congure and schedule the recording settings.
To Next Page
Loading...
Need help?
Operating Environment
Power
Weight and Dimensions
