66D-Link DCS-5220 User Manual
Section 3 - Configuration
Current rmware
version:
Current rmware
date:
File Path:
Upload:
It will be automatically determined and displayed
by the system.
It will be automatically determined and displayed
by the system.
Locate the le (upgraded rmware) on your hard
drive using the browse feature.
Start uploading and upgrading the new rmware
to your camera.
Firmware Update
Your current rmware version and date will be displayed on your screen. You may go to the D-Link Support page to
check for the latest rmware version available.
To upgrade the rmware on your DCS-5220, please download and save the latest rmware version from the D-Link
support site to your local hard drive. Locate the le on your local hard drive by clicking the Browse button. Then, open
the le and click the “Upload” button to start the rmware upgrade.
To Next Page
Loading...
