D-Link DCS-5220 User Manual

11D-Link DCS-5220 User Manual
Section 3 - Configuration
D-Link Click’n Conenct (DCC)
DCC will show the MAC address and IP address of your DCS-5220. If you have a DHCP* server on your network, there
will be a valid IP Address displayed at the end of DCC process. You can begin to use the Network camera now.
*A DHCP server is a device that supplies IP Addresses to its
clients that are on the same network.
Configuration
Turn on the computer and Insert the D-Link DCS-5220 Driver CD in the CD-ROM drive. The step-by-step instructions
will help you to search and setup your Network camera smoothly and quickly.
If the CD Autorun function does not automatically start on your computer, click Windows
®
Start > Run. In the Run
command box type “D:\DCS5220.exe”, where D: represents the drive letter of your CD-ROM. If it does start, proceed
to the next screen.
Click Start

D-Link DCS-5220 Specifications

Operating Environment

operating temperature	0˚ to 40˚C (32˚- 104˚F)
storage temperature	-40˚ to 70˚C (-14˚ - 158˚F)
humidity	Max. 95% RH

Power

external power supply	12V DC 1.5A
power consumption	4.8 Watts

Camera Specifications

cmos sensor	1/4”
minimum illumination	0.5 Lux @ F2.0
viewing angle horizontal	270º
viewing angle vertical	90º

Video and Audio

video resolution at 160x120	Up to 30fps
video resolution at 176x144	Up to 30fps
video resolution at 320x240	Up to 30fps
video resolution at 640x480	Up to 30fps
audio bitrate AAC	16kbps~128kbps
audio bitrate GSM-AMR	4.75kbps~12.2kbps

Weight and Dimensions

width	4.1”
height	4.4”
depth	4.3”
item weight	0.7 lbs
packaging weight	2.9 lbs