80D-Link DCS-5220 User Manual
Appendix D - Frequently Asked Questions
To ensure the highest security and prevent unauthorized
use of the Network Camera, the Administrator has the
exclusive privilege to access the System Administration
settings to allow users entry and authorize privileges
for all users. The Network Camera supports multi-level
password protection/access to the Network Camera
that can be restricted to dened users who have a User
Name and User Password, which is assigned by the
Administrator.
The Administrator can release a public user name and
password so that when remote users access the Network
Camera they will have the right to view the image
transmitted by the Network Camera.
When the Network Camera is used for the rst time, it is
highly recommended that the Administrator set the Administrator’s Password to constrain user access to the Network
Camera since the Default settings are Null String (no password). Once the Password is dened, only the Administrator
has access to the management of the Network Camera. This procedure should be done as soon as possible since
the security features of the Network Camera will not be enabled until the Administrator Password is dened.
At this point it is highly recommended that you click on
the Maintenance button on the Home screen, and then
the Tools tab to bring you to the Admin screen. Enter a
password for security purposes.
Setting Security
To Next Page
Loading...
