D-Link DCS-5220 - Logs

68D-Link DCS-5220 User Manual
Section 3 - Configuration
Enable remote log:
Log server settings:
IP Address:
Port:
Save:
Current Log:
Click to enable this feature so that the
camera can send camera log files to a
remote server.
Congure the settings for the log server.
The IP address of the remote server.
The port number of the remote log server.
The default port is 514.
Click to save the settings.
Displays the the system’s log file. The
content of the le reveals useful information
about camera conguration and connectivity
status after the camera boots up.
Logs
This page displays the log information of your camera. You can congure a remote log server so that you can view
your log details remotely.