60D-Link DCS-5220 User Manual
Section 3 - Configuration
Event name:
Enable this
event:
Priority:
Delay:
Trigger:
Video motion
detection:
Periodic:
System boot:
Time:
Move to preset
location:
Enter a name for the event.
Select to activate this event.
Set the priority for this event. The event with
higher priority will be executed rst.
Select the delay time before checking next
event. It is being used for both events of motion
detection and digital input trigger.
The input type that triggers the event.
Motion is detected during live video monitoring.
Select the windows that need to be monitored.
The event is triggered in specied intervals. The
unit of trigger interval is minute.
Triggers an event when the system boots up.
Select Always or enter the time interval.
Select to move camera PTZ to the preset
position.
Add Event
Create and schedule up to 3 events with their own settings here.
To Next Page
Loading...
