18D-Link DCS-5220 User Manual
Section 3 - Configuration
After all the router settings have been entered correctly, a PC user inside or outside your network will have access to
the camera through the Internet browser. To access the camera from the Internet, type the IP Address of the router
given to you by your ISP, followed by a colon, and the port number that you gave your camera (e.g., For example:
http://70.42.15.9:83). It is not necessary to enter the colon and port number if you are using the default Web server
port 80. To access from a computer on your local (home) network, simply enter the local IP Address of the Camera
followed by a colon and the port number (e.g., 192.168.0.120:83).
Viewing Your DCS-5220
If you are following this manual in the order it is presented, you
should now have an operating DCS-5220 Network Camera
congured with the Installer program. This section of the manual
will cover how to use the Network Camera in two methods:
• Using the DCS-5220 with an Internet browser and accessing
the screens to control and monitor the camera.
• Using D-ViewCam software with the DCS-5220.
To Next Page
Loading...
Need help?
Operating Environment
Power
Weight and Dimensions
