81D-Link DCS-5220 User Manual
Appendix D - Frequently Asked Questions
D-Link’s DCS-5220 is a versatile and cost effective Network Camera offering both video and audio monitoring. It can
also serve as a powerful surveillance system in security applications. The DCS-5220 can be used with any wired or
802.11b/g wireless router. This section explains how to view the camera from either the Internet or from inside your
internal network.
Materials Needed:
• 1 DCS-5220 Network Camera
• 1 Ethernet Cable
• A Wired or Wireless router such as the D-Link DIR-655 Wireless Router
• Ethernet based PC for system conguration
Setting up the DCS-5220 for Use Behind a Router
Installing a DCS-5220 Network Camera on your network is an easy 4–step procedure:
1 Assign a Local IP Address to Your Network Camera
2 View the Network Camera Using Your Internet Browser
3 Access the Router with Your Web Browser
4 Open Virtual Server Ports to Enable Remote Image Viewing
This section is designed to walk you through the setup process for installing your camera behind a router and enable
remote video viewing. For the basic setup of the DCS-5220, follow the steps outlined in the Quick Installation Guide.
Using & Configuring the DCS-5220 with a NAT Router
To Next Page
Loading...
