D-Link DCS-5220 - Add Media (Post-Event Images)

58D-Link DCS-5220 User Manual
Section 3 - Configuration
Send post-event image (s) [0~7)
Specify to capture the number of images after a trigger is activated. A maximum of seven images can be generated.
For example:
If both the Send pre-event images and Send post-event images are set to seven, a total of 15 images are generated
after a trigger is activated.
Add date and time sufx to le name
Select this option to add date and time to the le name sufx.
1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. 10 pic. 11 pic. 10 pic. 12 pic. 13 pic. 14 pic. 15 pic.
The moment the
trigger is activated.
SNAPSHOTS20080104_100341
Date and time suffix
The format is: YYYYMMDD_HHMMSS
File name prefix