D-Link DSL-245GE - Page 107

103D-Link DSL-245GE User Manual
Section 7 - Troubleshooting
• Access the web conguration. Open your web browser and enter the IP address of your D-Link router in the address bar.
This should open the login page for your web conguration.
• If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.
To reset the router, locate the reset button on the side of the unit. With the router powered on, hold the button down for 5
seconds and release the button. The router will go through its reboot process (all LEDs will be o and on again). Wait about
30 seconds to access the router. The default IP address is 192.168.1.1. When logging in, enter the admin password shown on
device label attached to the bottom of the device.