D-Link DSL-245GE - Tr069

76D-Link DSL-245GE User Manual
Section 4 - Conguration
TR069
TR069 allows for automatic conguration between an auto-conguration
server (ACS) and your router. To access this page, go to Features > TR069.
Please check with your service provider, or leave the settings at their defaults
if you are not sure.
TR-069
CWMP: Activate or deactivate CPE WAN Management Protocol (CWMP)
ACS
URL:
Specify the URL of the
auto-conguration server (ACS), starting
with http://
.
Username: Enter the username to log in to the ACS remote server.
Password: Enter the password to log in to the ACS remote server.
Connection Request
Connection
Request Path:
Specify the request path here.
Username: Enter the username for connection request sent from the ACS remote
server to the router.
Password: Enter the password for connection request sent from the ACS remote
server to the router.
Periodic Inform: Activate or deactivate the periodic inform function.
Interval: Specify the interval in seconds for each inform packet (1-999999).
The default is 43200.
Authentication
Mode:
Select either Server or Client authentication method.
Enable Certicate
Function:
Enable or disable certication for authentication.