D-Link DSL-245GE User Manual

36D-Link DSL-245GE User Manual
Section 4 - Conguration
Connection Type: Static IP
Select Static IP Address if your ISP provides you with a specic IP address.
IPv4 Settings
Connection: Select Static IP Address.
Service List: Select a service type from the list. Choose from INTERNET, TR069_
INTERNET, TR069, or OTHER. This information should be provided
by your ISP. If you are conguring your connection manually and
your ISP has not specied this setting, INTERNET is recommended.
Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing
mechanism. If you choose IPv6, refer to the below IPv6 Settings.
Connection Type: Select Bridged IP LLC or Bridged IP VC-Mux as the encapsulation
method. This is only available for ADSL.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Gateway Address: Enter the default gateway address provided by your ISP.
Primary DNS
Server
Enter the primary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Secondary DNS
Server
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Advanced Settings

D-Link DSL-245GE Specifications

General

Brand	D-Link
Model	DSL-245GE
Category	Network Router
Language	English