D-Link DSL-245GE User Manual

37D-Link DSL-245GE User Manual
Section 4 - Conguration
MTU: Maximum Transmission Unit (576-1516) - you may need to change
the MTU for optimal performance with your ISP.
NAT Enable: Network address translation (NAT) translates private IP addresses to
public IP addresses prior to allowing private IP networks to connect
to the public network.
IPv6 Settings
IPv6 Message
Fetch Type:
This displays the IP assignment method.
IPv6 Address Enter an IPv6 address in this format: x:x:x:x:x:x:x:x/y (where each x
represents a hexadecimal digit, y is an integer from 1 to 128 as the
prex length), for example, 2001:b011:2000:0012::1/64.
IPv6 Default
Gateway:
Enter the IP address of the default gateway.
IPv6 DNS Server
1:
Enter the DNS server address.
IPv6 DNS Server
2:
Enter the secondary DNS server address as a backup.
PD Enable Enable or disable prex delegation. Also select the prex mode: Auto
or Manual. For Manual, please enter the prex address, for example,
2001:b011:2000:0012::. The prex is used to determine the subnet
prex of an IPv6 address. Then enter the prex information option
by specifying preferred lifetime and valid lifetime for the prex (600-
4294967295 seconds).
Click Save when you are done.

D-Link DSL-245GE Specifications

General

Brand	D-Link
Model	DSL-245GE
Category	Network Router
Language	English