D-Link DSL-245GE - Page 39

35D-Link DSL-245GE User Manual
Section 4 - Conguration
IPv6 Settings
IPv6 Message
Fetch Type:
This displays the IP assignment method.
DHCP IPv6 Enable: Select the IPv6 auto-configuration type: SLAAC (IPv6 StateLess
Address AutoConguration) or DHCP (Dynamic Host Conguration
Protocol). If DHCP is selected, enter the default gateway or leave it
blank for automatic conguration.
IPv6 Default
Gateway:
Enter the IP address of the default gateway.
This is only available for DHCP.
PD Enable Enable or disable prex delegation. Also select the prex mode:
Auto or Manual. For Manual, please enter the prex address, for
example 2001:b011:2000:0012::. Enter the prex information option
by specifying preferred lifetime and valid lifetime for the prex (600-
4294967295 seconds).
Click Save when you are done.