DWR-921 4G LTE Router
User Manual
Configuring via Web-based Interface
To change a period of inactivity after which the router completes the session of the interface, in the
Miscellaneous section, in the Idle time field, specify the needed value (in minutes). By default,
the value 5 is specified. Then click the SAVE button.
In the Action section, the following buttons are available:
Control Description
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Front Panel section, page 12).
Backup
Click the button to save the configuration (all settings of the router)
to your PC. The configuration backup will be stored in the
download location of your web browser.
Restore
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the router)
located on your PC and upload it.
Save
Click the button to save settings to the non-volatile memory.
The router saves changed settings automatically. If changed settings
have not been saved automatically, a notification is displayed in the
top right part of the page.
Reboot
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Page 221 of 255
To Next Page
Loading...
