DXS-3350SR Gigabit Layer 3 Switch
802.1p Default Priority
The Switch allows the assignment of a default 802.1p priority to each port on the Switch. In the Configuration folder open
the QoS folder and click 802.1p Default Priority, to view the screen shown below.
Figure 6- 46. 802.1p Default Priority window
This page allows you to assign a default 802.1p priority to any given port on the Switch. The priority queues are numbered
from 0, the lowest priority, to 7, the highest priority. Click Apply to implement your settings.
94
To Next Page
Loading...
