DXS-3350SR Gigabit Layer 3 Switch
Reboot Device
The following window is used to restart the Switch.
Figure 9- 11. Restart System window
Clicking the Yes click-box will instruct the Switch to save the current configuration to non-volatile RAM before restarting
the Switch.
Clicking the No click-box instructs the Switch not to save the current configuration before restarting the Switch. All of the
configuration information entered from the last time Save Changes was executed will be lost.
Click the Restart button to restart the Switch.
Logout
Use the Logout page to logout of the Switch’s Web-based management agent by clicking on the Log Out button.
Figure 9- 1 . Logout Web Setups window 2
249
To Next Page
Loading...
