D-Link NetDefend DFL-210

Parameters
len
retrigs
Context Parameters
ALG Module Name
ALG Session ID
2.1.170. max_tls_sessions_reached (ID: 00200450)
Default Severity
WARNING
Log Message
TLSALG: Maximum number of TLS sessions (<max_sessions>) for
service reached. Closing connection
Explanation
The maximum number of concurrent TLS sessions has been reached
for this service. No more sessions can be opened before old sessions
have been released.
Gateway Action
close
Recommended Action
If the maximum number of TLS sessions is too low, increase it.
Revision
1
Parameters
max_sessions
Context Parameters
ALG Module Name
2.1.171. failed_create_new_session (ID: 00200451)
Default Severity
WARNING
Log Message
TLSALG: Failed to create new TLSALG session (out of memory)
Explanation
An attempt to create a new TLSALG session failed, because the unit is
out of memory.
Gateway Action
close
Recommended Action
Decrease the maximum allowed TLSALG sessions, or try to free some
of the RAM used.
Revision
1
Context Parameters
ALG Module Name
2.1.172. failure_connect_http_server (ID: 00200452)
Default Severity
ERROR
Log Message
TLSALG: Failed to connect to the HTTP Server. Closing connection.
ALG name: <algname>.
Explanation
The unit failed to connect to the HTTP Server, resulting in that the
ALG session could not be successfully opened.
Gateway Action
close
2.1.170. max_tls_sessions_reached
(ID: 00200450)
Chapter 2. Log Message Reference
101