D-Link NetDefend DFL-210

Parameters
client
2.40.14. key_algo_not_supported. (ID: 04700055)
Default Severity
ERROR
Log Message
The authentication algorithm type <keytype> is not supported. Client
<client>
Explanation
The authentication algorithm that the client uses is not supported.
Closing connection.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
keytype
client
2.40.15. unsupported_pubkey_algo (ID: 04700057)
Default Severity
NOTICE
Log Message
Public Key Authentication Algorithm <authalgo> from client <client>
not supported/enabled.
Explanation
The client is trying to authenticate using a Public Key Algorithm
which is either not supported or not enabled.
Gateway Action
close
Recommended Action
If the algorithm is supported by unit, configure the unit to make use of
it.
Revision
1
Parameters
authalgo
client
2.40.16. max_ssh_clients_reached (ID: 04700060)
Default Severity
WARNING
Log Message
Maximum number of connected SSH clients (<maxclients>) has been
reached. Denying acces for client: <client>.
Explanation
The maximum number of simultaneously connected SSH clients has
been reached. Denying access for this attempt, and closing the
connection.
Gateway Action
close
Recommended Action
None.
Revision
1
2.40.14. key_algo_not_supported. (ID:
04700055)
Chapter 2. Log Message Reference
407