EasyManua.ls Logo

D-Link NetDefend DFL-210

D-Link NetDefend DFL-210
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Explanation
Due to extensive logging, a number of log messages was not sent.
Gateway Action
None
Recommended Action
Examine why the unit sent such a large amount of log messages. If this
is normal activity, the "LogSendPerSec" setting might be set too low.
Revision
1
Parameters
logcnt
2.41.14. log_messages_lost_due_to_log_buffer_exhaust
(ID: 03200401)
Default Severity
WARNING
Log Message
<logcnt> log messages lost due to log buffer exhaustion
Explanation
Due to extensive logging, a number of log messages was not sent.
Gateway Action
None
Recommended Action
Examine why the unit sent such a large amount of log messages. If this
is normal activity, the "LogSendPerSec" setting might be set too low.
Revision
1
Parameters
logcnt
2.41.15. ssl_encryption_failed (ID: 03200450)
Default Severity
ERROR
Log Message
Encryption failed.
Explanation
Encryption failed due to error. Connection closed.
Gateway Action
None
Recommended Action
None.
Revision
1
2.41.16. bidir_fail (ID: 03200600)
Default Severity
CRITICAL
Log Message
Failed to establish bi-directional communication with peer in
<timeout> seconds
Explanation
The unit failed to establish a connection back to peer, using the new
configuration. It will try to revert to the previous configuration file.
Gateway Action
None
Recommended Action
Verify that the new configuration file does not contain errors that
2.41.14. log_messages_lost_due_to_log_buffer_exhaust
(ID: 03200401)
Chapter 2. Log Message Reference
414

Table of Contents

Other manuals for D-Link NetDefend DFL-210

Related product manuals