D-Link NetDefend DFL-210

2.19. IDPUPDATE
These log messages refer to the IDPUPDATE (Intrusion Detection & Prevention Database
update) category.
2.19.1. idp_db_update_failure (ID: 01400001)
Default Severity
ALERT
Log Message
Update of the Intrusion Detection & Prevention database failed,
because of <reason>
Explanation
The unit tried to update the Intrusion Detection & Prevention database,
but failed. The reason for this is specified in the "reason" parameter.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
reason
2.19.2. idp_database_downloaded (ID: 01400002)
Default Severity
NOTICE
Log Message
New Intrusion Detection & Prevention database downloaded
Explanation
An updated version of the Intrusion Detection & Prevention database
has been downloaded, which will now be used.
Gateway Action
using_new_database
Recommended Action
None.
Revision
2
2.19.3. idp_db_already_up_to_date (ID: 01400003)
Default Severity
NOTICE
Log Message
Intrusion Detection & Prevention database is up-to-date
Explanation
The current Intrusion Detection & Prevention database is up-to-date,
and does not need to be updated.
Gateway Action
None
Recommended Action
None.
Revision
1
2.19.4. idp_db_update_denied (ID: 01400004)
2.19. IDPUPDATE Chapter 2. Log Message Reference
236