D-Link NetDefend DFL-210

Recommended Action
Make sure all locally attached OSPF routers share the same E-flag
configuration.
Revision
1
Parameters
recv_e_flag
my_e_flag
Context Parameters
Rule Name
Packet Buffer
2.29.12. hello_n_flag_mismatch (ID: 02400012)
Default Severity
WARNING
Log Message
Hello N-flag mismatch. Received was <recv_n_flag>, mine is
<my_n_flag>. Dropping
Explanation
Received OSPF data from a neighboring router with mismatching
N-flag (NSSA details) configuration.
Gateway Action
drop
Recommended Action
Make sure all locally attached OSPF routers share the same N-flag
configuration.
Revision
1
Parameters
recv_n_flag
my_n_flag
Context Parameters
Rule Name
Packet Buffer
2.29.13. both_np_and_e_flag_set (ID: 02400013)
Default Severity
WARNING
Log Message
Hello N-flag and E-flag set. This is a illegal combination. Dropping
Explanation
Received OSPF data from a neighboring router which illegally have
both the N and E-flag set.
Gateway Action
drop
Recommended Action
Check the configuration on the neighboring router.
Revision
1
Context Parameters
Rule Name
Packet Buffer
2.29.14. unknown_lsa_type (ID: 02400014)
Default Severity
WARNING
Log Message
Unknown LSA type <lsatype>. Dropping
2.29.12. hello_n_flag_mismatch (ID:
02400012)
Chapter 2. Log Message Reference
342