D-Link NetDefend DFL-210

Default Severity
ERROR
Log Message
Failed to set properties IPsec alogorithm <alg>, for tunnel <tunnel>
Explanation
Failed to set specified properties (keysize, lifetimes) for IPsec
algorithm.
Gateway Action
use_default_values_for_algorithm
Recommended Action
None.
Revision
1
Parameters
alg
tunnel
2.22.33. failed_to_set_algorithm_properties (ID: 01800305)
Default Severity
ERROR
Log Message
Failed to set properties for IKE algorithm <alg>, for tunnel <tunnel>
Explanation
Failed to set specified properties (keysize, lifetimes) for IKE
algorithm.
Gateway Action
use_default_values_for_algorithm
Recommended Action
None.
Revision
1
Parameters
alg
tunnel
2.22.34. failed_to_add_root_certificate (ID: 01800306)
Default Severity
ERROR
Log Message
Failed add root certificate: <certificate>, for tunnel <tunnel>
Explanation
Failed to set specified certificate as root certificate.
Gateway Action
disable_certificate
Recommended Action
Reconfigure_tunnnel.
Revision
1
Parameters
certificate
tunnel
2.22.35. dns_resolve_failed (ID: 01800308)
Default Severity
WARNING
Log Message
Failed to resolve remote gateway <gateway> for IPsec Tunnel
2.22.33. failed_to_set_algorithm_properties
(ID: 01800305)
Chapter 2. Log Message Reference
257