D-Link NetDefend DFL-210

Explanation
The client tried to issue a "REST" command, which is not valid since
the client is not allowed to do this. The command will be rejected.
Gateway Action
rejecting_command
Recommended Action
If the client should be allowed to do issue "REST" commands, modify
the FTPALG configuration.
Revision
1
Parameters
filename
peer
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.110. unknown_state (ID: 00200300)
Default Severity
WARNING
Log Message
H323ALG: H.225 parser is in unknown state
Explanation
The H.225 parser failed to parse the H.225 message. The ALG session
will be closed.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
peer
state
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.111. invalid_message (ID: 00200301)
Default Severity
WARNING
Log Message
H323ALG: An invalid message was received from peer
Explanation
An invalid message was received from the peer. The ALG session will
be closed.
Gateway Action
closing_session
Recommended Action
None.
Revision
2
Parameters
peer
message
state
Context Parameters
ALG Module Name
2.1.110. unknown_state (ID: 00200300) Chapter 2. Log Message Reference
79