D-Link NetDefend DFL-210

Default Severity
ERROR
Log Message
Failed set XAuth for tunnel <tunnel>
Explanation
Failed to set extended authentication (XAuth) for the tunnel.
Gateway Action
None
Recommended Action
Reconfigure_tunnnel.
Revision
1
Parameters
tunnel
2.22.49. Failed_to_create_xauth_group (ID: 01800329)
Default Severity
CRITICAL
Log Message
Failed create XAuth group
Explanation
Failed to create extended authentication (XAuth) group.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.50. IPSec_tunnel_added (ID: 01800333)
Default Severity
INFORMATIONAL
Log Message
IPsec tunnel added to the configuration
Explanation
An IPsec tunnel has been enabled or added to the configuration.
Gateway Action
reconfiguration
Recommended Action
None.
Revision
1
Parameters
username
client_ip
IPsec_tunnel
2.22.51. IPSec_tunnel_added_bySGW (ID: 01800334)
Default Severity
INFORMATIONAL
Log Message
IPsec tunnel added by the Security Gateway
Explanation
An IPsec tunnel has been added by the Security Gateway.
Gateway Action
reconfiguration_by_SGW
2.22.49. Failed_to_create_xauth_group
(ID: 01800329)
Chapter 2. Log Message Reference
262