D-Link NetDefend DFL-210

Gateway Action
disallow_admin_access
Recommended Action
None.
Revision
1
Parameters
authsystem
username
[server_ip]
[server_port]
[client_ip]
[client_port]
2.41.35. activate_changes_failed (ID: 03204000)
Default Severity
NOTICE
Log Message
Bidirectional confirmation of the new configuration failed, previous
configuration will be used
Explanation
The unit failed to establish a connection back to peer, using the new
configuration. The previous configuration will still be used.
Gateway Action
using_prev_config
Recommended Action
Make sure that the new configuration allows the unit to establish a
connection with the administration interface.
Revision
1
Parameters
authsystem
2.41.36. accept_configuration (ID: 03204001)
Default Severity
NOTICE
Log Message
New configuration activated by user <username> from
<config_system> <client_ip>.
Explanation
The new configuration has been successfully activated.
Gateway Action
using_new_config
Recommended Action
None.
Revision
1
Parameters
username
userdb"
client_ip
config_system
2.41.37. reject_configuration (ID: 03204002)
Default Severity
NOTICE
Log Message
New configuration rejected by user <username> from
2.41.35. activate_changes_failed (ID:
03204000)
Chapter 2. Log Message Reference
421