D-Link NetDefend DFL-210

Default Severity
WARNING
Log Message
SIPALG: Maximum number of transaction per session has been
reached
Explanation
The configured maximum number of concurrent SIP sessions
[max_ses_per_service] per SIP SERVICE has been reached.
Gateway Action
close
Recommended Action
If the maximum number of SIPALG sessions per SIP service is too
low, increase it.
Revision
2
Parameters
max_ses_per_service
from_uri
to_uri
srcip
srcport
destip
destport
Context Parameters
ALG Module Name
2.1.229. max_tsxn_per_session_reached (ID: 00200551)
Default Severity
WARNING
Log Message
SIPALG: Maximum number of sessions per Service has been reached
Explanation
The configured maximum number of transaction
[max_tsxn_per_session] per SIP SESSION has been reached.
Gateway Action
close
Recommended Action
None.
Revision
2
Parameters
max_tsxn_per_session
from_uri
to_uri
srcip
srcport
destip
destport
Context Parameters
ALG Module Name
2.1.230. invalid_transaction_state (ID: 00200552)
Default Severity
ERROR
Log Message
SIPALG: Invalid transaction state change
Explanation
Invalid transaction state found [tsxn_invalid_state].
2.1.229. max_tsxn_per_session_reached
(ID: 00200551)
Chapter 2. Log Message Reference
124