D-Link NetDefend DFL-210

Parameters
area
vlink
Context Parameters
Rule Name
2.29.48. internal_error_unable_to_map_identifier (ID:
02400301)
Default Severity
WARNING
Log Message
Internal error: Unable to map a identifier for LSA Type:<lsatype>
ID:<lsaid> AdvRouter:<lsaadvrtr>
Explanation
Unable to map an identifier for a LSA.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
lsatype
lsaid
lsaadvrtr
Context Parameters
Rule Name
2.29.49. lsa_size_too_big (ID: 02400302)
Default Severity
WARNING
Log Message
Requested LSA size(<lsasize>) too big. Unable to create LSA
Explanation
Unable to create LSA since the size is too big.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
lsasize
Context Parameters
Rule Name
2.29.50. memory_usage_exceeded_70_percent_of_max_allowed
(ID: 02400303)
Default Severity
WARNING
Log Message
Memory usage for OSPF process <ospfproc> have now exceeded 70
percent of the maximum allowed
Explanation
The memory usage for a OSPF process have exceeded 70 percent of
the maximum allowed.
2.29.48. internal_error_unable_to_map_identifier
(ID: 02400301)
Chapter 2. Log Message Reference
354