D-Link NetDefend DFL-210

Parameters
status_msg
2.22.45. failed_to_add_certificate (ID: 01800322)
Default Severity
ERROR
Log Message
Failed add certificate: <certificate>, for tunnel <tunnel>
Explanation
Failed to add certificate. Tunnel configured with this certificate for
authentication will fail while negotiate.
Gateway Action
certificate_disabled
Recommended Action
None.
Revision
1
Parameters
certificate
tunnel
2.22.46. failed_to_set_remote_ID (ID: 01800323)
Default Severity
ERROR
Log Message
Invalid type for ID in remote access idlist: <type>, for tunnel <tunnel>
Explanation
Invalid type for ID in remote access idlist have been specified in
configuration.
Gateway Action
vpntunnel_disabled
Recommended Action
Reconfigure_tunnel.
Revision
1
Parameters
type
tunnel
2.22.47. failed_to_create_authorization (ID: 01800327)
Default Severity
CRITICAL
Log Message
Failed to create local authorization object
Explanation
Failed to create local authorization object. configured remote access
groups will not be posible to use.
Gateway Action
IPsec_disabled
Recommended Action
None.
Revision
1
2.22.48. Failed_to_set_xauth (ID: 01800328)
2.22.45. failed_to_add_certificate (ID:
01800322)
Chapter 2. Log Message Reference
261