EasyManua.ls Logo

D-Link NetDefend DFL-210

D-Link NetDefend DFL-210
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gateway Action
drop
Recommended Action
This can be changed under the Advanced Settings section.
Revision
1
Parameters
proto
Context Parameters
Rule Name
Packet Buffer
2.26.21. oversize_ip (ID: 07000058)
Default Severity
WARNING
Log Message
Configured size limit for IP protocol exceeded. Dropping
Explanation
The configured size limit for the IP protocol was exceeded. Dropping
packet.
Gateway Action
drop
Recommended Action
This can be changed under the Advanced Settings section.
Revision
1
Parameters
proto
Context Parameters
Rule Name
Packet Buffer
2.26.22. fragmented_icmp (ID: 07000070)
Default Severity
WARNING
Log Message
This ICMP type is not allowed to be fragmented. Dropping
Explanation
The ICMP type is not allowed to be framented. Only "Echo" and
"EchoReply" are allowed to be fragmented. Dropping packet.
Gateway Action
drop
Recommended Action
None.
Revision
1
Context Parameters
Rule Name
Packet Buffer
2.26.23. invalid_icmp_data_too_small (ID: 07000071)
Default Severity
WARNING
Log Message
Invalid ICMP data length. ICMPDataLen=<icmpdatalen>
ICMPIPHdrMinLen=<icmpiphdrminlen>. Dropping
Explanation
The ICMP data is not large enough to contain an IPv4 Header.
2.26.21. oversize_ip (ID: 07000058) Chapter 2. Log Message Reference
324

Table of Contents

Other manuals for D-Link NetDefend DFL-210

Related product manuals