D-Link NetDefend DFL-210

Default Severity
ERROR
Log Message
SMTPALG: Command line too long
Explanation
The SMTP Command line exceeds the maximum command length of
712 characters. (RFC 2821 Ch. 4.5.3.1 says 512).
Gateway Action
reject
Recommended Action
None.
Revision
2
Context Parameters
ALG Module Name
ALG Session ID
2.1.62. cmd_empty (ID: 00200180)
Default Severity
DEBUG
Log Message
SMTPALG: Received empty command.
Explanation
The SMTP command line was empty. Ignoring command.
Gateway Action
ignore
Recommended Action
None.
Revision
1
Context Parameters
ALG Module Name
ALG Session ID
2.1.63. failed_send_reply_code (ID: 00200181)
Default Severity
ERROR
Log Message
SMTPALG: Could not send error code to client
Explanation
The SMTP ALG failed to send an error response code to the client.
Gateway Action
none
Recommended Action
None.
Revision
1
Context Parameters
ALG Module Name
ALG Session ID
2.1.64. smtp_no_header (ID: 00200184)
Default Severity
WARNING
Log Message
SMTPALG: Email without SMTP headers received
Explanation
The SMTP ALG received an email without headers.
2.1.62. cmd_empty (ID: 00200180) Chapter 2. Log Message Reference
61