D-Link NetDefend DFL-210

Explanation
An invalid command was received on the control channel. This is
allowed, but the command will be rejected as it is not understood.
Gateway Action
rejecting_command
Recommended Action
If unknown commands should not be allowed, modify the FTPALG
configuration.
Revision
1
Parameters
peer
string
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.76. port_command_disabled (ID: 00200214)
Default Severity
WARNING
Log Message
FTPALG: PORT command not allowed from <peer>. Rejecting
command
Explanation
The client tried to issue a "PORT" command, which is not valid since
the client is not allowed to do active FTP. The command will be
rejected.
Gateway Action
rejecting_command
Recommended Action
If the client should be allowed to do active FTP, modify the FTPALG
configuration.
Revision
1
Parameters
peer
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.77. illegal_command (ID: 00200215)
Default Severity
WARNING
Log Message
FTPALG: Failed to parse PORT parameters from <peer>.
String=<string>. Closing connection
Explanation
Invalid parameters to the "PORT" command were received. The
connection will be closed.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
peer
string
2.1.76. port_command_disabled (ID:
00200214)
Chapter 2. Log Message Reference
66