2.10.14. bad_inform_pkt_with_mismatching_source_ip_and_client_ip
(ID: 00800014)
Default Severity
WARNING
Log Message
INFORM packet did not pass through a relayer but the packet source
ip and the client ip doesnt match. Dropping
Explanation
Received non relayed INFORM DHCP packet with illegally
mismatching source and client IP.
Gateway Action
drop
Recommended Action
Investigate what client implementation is being used.
Revision
1
Context Parameters
Rule Name
Packet Buffer
2.10.15. received_relayed_inform_packet_without_client_ip
(ID: 00800015)
Default Severity
WARNING
Log Message
INFORM packet passed a relayer but the client ip isnt set. Dropping
Explanation
Received relayed INFORM DHCP packet with illegally missing client
IP.
Gateway Action
drop
Recommended Action
Investigate what client implementation is being used.
Revision
1
Context Parameters
Rule Name
Packet Buffer
2.10.16. maximum_current_dhcp_relays_for_iface (ID:
00800016)
Default Severity
WARNING
Log Message
The maximum number <max_relays> of current DHCP relays for this
interface have been reached. Dropping
Explanation
The maximum number of DHCP relayed through a specified interface
have been reached.
Gateway Action
drop
Recommended Action
Verify max-relay-per-interface setting.
Revision
1
2.10.14. bad_inform_pkt_with_mismatching_source_ip_and_client_ip
(ID: 00800014)
Chapter 2. Log Message Reference
178
To Next Page
Loading...
