D-Link NetDefend DFL-210

Default Severity
ERROR
Log Message
FTPALG: Failed to create connection(1). Connection: <connection>.
String=<string>
Explanation
An error occured when creating a data connection from the server to
client. This could possibly be a result of lack of memory.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
peer
connection
string
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.81. illegal_command (ID: 00200219)
Default Severity
WARNING
Log Message
FTPALG: SITE EXEC from <peer> not allowed, rejecting command
Explanation
The client tried to issue a "SITE EXEC" command, which is not valid
since the client is not allowed to do this. The command will be
rejected.
Gateway Action
rejecting_command
Recommended Action
If the client should be allowed to do issue "SITE EXEC" commands,
modify the FTPALG configuration.
Revision
1
Parameters
peer
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.82. illegal_direction1 (ID: 00200220)
Default Severity
WARNING
Log Message
FTPALG: Illegal direction for command(1), peer=<peer>. Closing
connection.
Explanation
A command was sent in an invalid direction, and the connection will
be closed.
Gateway Action
close
Recommended Action
None.
2.1.81. illegal_command (ID:
00200219)
Chapter 2. Log Message Reference
68