D-Link NetDefend DFL-210

Log Message
TFTPALG: Packet failed initial test (Invalid TFTP packet). Packet
length <packet_length>
Explanation
An invalid TFTP packet was received. Refusing connection.
Gateway Action
reject
Recommended Action
None.
Revision
1
Parameters
packet_length
Context Parameters
ALG Module Name
Connection
2.1.129. packet_failed_traversal_test (ID: 00200351)
Default Severity
WARNING
Log Message
TFTPALG: Filename <filename> failed test for directory traversal
Explanation
Filename failed test for directory traversal (contains invalid
characters).Closing connection.
Gateway Action
reject
Recommended Action
If all characters in filenames should be allowed modify the TFTP Alg
configuration.
Revision
1
Parameters
filename
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.130. command_not_allowed (ID: 00200353)
Default Severity
WARNING
Log Message
TFTPALG: <command> command not allowed
Explanation
Command (GET or PUT) not allowed. Closing connection.
Gateway Action
reject
Recommended Action
If command should be allowed modify the TFTP Alg configuration.
Revision
1
Parameters
command
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.129. packet_failed_traversal_test
(ID: 00200351)
Chapter 2. Log Message Reference
86