D-Link NetDefend DFL-210

Log Message
Could not select policy rule
Explanation
Could not select policy rule.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.177. failed_to_select_ike_sa (ID: 01803002)
Default Severity
INFORMATIONAL
Log Message
Could not select SA from IKE SA proposal
Explanation
Could not select SA from IKE SA proposal.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.178. ike_phase1_notification (ID: 01803003)
Default Severity
WARNING
Log Message
<status> Phase-1 notification from <remote_peer> for protocol
<proto>, SPI <spi>: <msg> (<type>) (<size> bytes)
Explanation
Received a IKE Phase-2 notification.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
status
remote_peer
proto
spi
msg
type
size
2.22.179. ipsec_sa_failed (ID: 01803020)
Default Severity
WARNING
Log Message
IPsec SA negotiation failed: <statusmsg>
Explanation
Negotiation of IPsec SA failed.
Gateway Action
no_ipsec_sa
2.22.177. failed_to_select_ike_sa (ID:
01803002)
Chapter 2. Log Message Reference
299