D-Link PS Admin User Manual

Print Server Administration User’s Guide
Setting up Novell NetWare 3.x Printing
27
4. Click on the port button corresponding to the port you want
to serve the print queue.
5. Click on the name of the NetWare file server where you wish
the print queue to be stored. (Clicking on the symbol to
the right of the file server name will expand the list of print
queues on the file server.)
6. Unless you want to use an existing print queue on the server,
you will need to create a new print queue. Click the Create
Queue button, then type in the name of the new print queue
and determine the file server volume where you want the
print queue to be stored. Click OK to create the queue.
7. Click on the print queue name.
8. Click on the Add >> button to add the print queue to the
Serviced Queues list for the port.

D-Link PS Admin Specifications

General

Brand	D-Link
Model	PS Admin
Category	Software
Language	English