Print Server Administration User’s Guide
124
Appendix: Telnet Interface Administration
Port Number 1 2 3
==============================================================
[Total Status]
Jobs 45 1 0
Sizes (KBytes) 23179 0 0
Timeouts 0 0 0
--------------------------------------------------------------
[Current Job]
Printer Status On Line Off Line On Line
Index 0 1 0
Protocol NETWARE
Name 00C60001
Spooling Bytes 0 172032 0
Printing Bytes 0 153600 0
==============================================================
1 - Refresh Port Status
0 - Return to Display Information Menu
Enter Selection:
Resetting the Print Server
Sometimes it may be desirable to restart the print server, in order to
reset its internal statistics counters or to clear other status
information.
The telnet interface provides two different types of reset:
♦ An ordinary reset has the same effect as powering off the
print server and powering it back on again. Statistics
counters will be cleared, but all of the print server’s
configuration settings will be retained.
♦ A factory reset not only restarts the print server, but changes
all of its configuration settings back to their original values,
as the print server was shipped from the factory.
To Next Page
Loading...
Need help?
General
