Print Server Administration User’s Guide
28
Setting up Novell NetWare 3.x Printing
9.
Click OK, then choose Save Configuration from the
Configuration menu (or press the Save Configuration
toolbar button) to change the settings in the print server and
the NetWare server. The print server will restart itself and
begin serving the specified print queue.
If you created the print queue in step 6, you may need to assign
queue operators and queue users to the print queue using PS
Admin or the NetWare PCONSOLE program. By default,
SUPERVISOR is assigned as the print queue’s operator, and all
members of the group EVERYONE are allowed to use the print
queue. For information about assigning print queue users and
operators using PS Admin, see the Managing Print Queues section
on page 98.
Remote Printer Setup Procedure
Your network print server can also be set up as NetWare remote
printer. This allows slightly easier administration, but may increase
printing delays. To set up a printer port as a remote printer port,
To Next Page
Loading...
Need help?
General
