Print Server Administration User’s Guide
40
Setting up Novell NetWare 3.x Printing
NetWare Settings
If necessary, you can use the Attributes tab of the NetWare
Configuration dialog window to set several of the print server’s
parameters.
To access the Attributes tab,
1.
Choose Netware Protocol... from the PS Admin
Configuration menu, or click the Configure NetWare button
in the toolbar. Click on the Attributes tab.
2.
Click on the port number button corresponding to the port
requiring a parameter change.
The parameters listed are:
♦ Queue Polling Interval This parameter determines how
often the print server scans print queues on the file server(s),
measured in seconds. A smaller number may mean that print
jobs are printed with a smaller delay, but will also greatly
increase the load on the server.
To Next Page
Loading...
Need help?
General
