Print Server Administration User’s Guide
Setting up AppleTalk Printing
71
choose Server Device... from the Configuration menu to
display this window.
2.
Choose AppleTalk Protocol... from the Configuration
menu.
3.
If your AppleTalk network is divided into AppleTalk zones,
you will have to specify which zone the print server should be
in. You should locate the print server in the same zone as
most of the users who will be using it.
If your network is not divided into zones, the AppleTalk Zone
field should contain a single asterisk “*”.
4.
For each printer port that will be used for AppleTalk printing,
you may need to change the AppleTalk port setttings. Press
the appropriate Port Setting button to open the Configuration
- AppleTalk / Port dialog window.
To Next Page
Loading...
Need help?
General
