D-Link X-STACK DES-3200 SERIES - Page 122

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
118
DES-3200-28P:admin#disable telnet
Command: disable telnet
Success.
DES-3200-28P:admin#
10-8 enable web
Description
This command is used to enable HTTP and configure port number.
Format
enable web {<tcp_port_number 1-65535>}
Parameters
<tcp_port_number 1-65535> - (Optional) The TCP port number. TCP ports are numbered
between 1 and 65535. The “well-known” TCP port for the WEB protocol is 80.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable HTTP and configure port number:
DES-3200-28P:admin#enable web 80
Command: enable web 80
Note: SSL will be disabled if web is enabled.
Success.
DES-3200-28P:admin#
10-9 disable web
Description
This command is used to disable HTTP.
Format
disable web
Parameters
None.