D-Link X-STACK DES-3200 SERIES - Page 170

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
166
DES-3200-28P:admin#show cfm linktrace mepname mep1 trans_id 26
Command: show cfm linktrace mepname mep1 trans_id 26
Transaction ID: 26
From MEP mep1 to 32-00-70-89-31-06
Start Time : 2011-11-22 16:05:08
Hop MEPID Ingress MAC Address Egress MAC Address Forwarded Relay Action
--- ----- ------------------- ------------------- --------- ------------
1 - 00-00-00-00-00-00 32-00-70-89-41-06 Yes FDB
2 - 00-32-28-40-09-07 00-32-28-40-09-05 Yes FDB
3 2 00-00-00-00-00-00 32-00-70-89-31-06 No Hit
DES-3200-28P:admin#”
To show the link trace reply when the "all MPs reply LTRs" function is disabled:
DES-3200-28P:admin#show cfm linktrace mepname mep1 trans_id 27
Command: show cfm linktrace mepname mep1 trans_id 27
Transaction ID: 27
From MEP mep1 to 32-00-70-89-31-06
Start Time : 2011-11-22 16:28:56
Hop MEPID Ingress MAC Address Egress MAC Address Forwarded Relay Action
--- ----- ------------------- ------------------- --------- ------------
1 - 00-00-00-00-00-00 32-00-70-89-41-06 Yes FDB
2 - 00-32-28-40-09-07 00-32-28-40-09-05 Yes FDB
3 2 00-00-00-00-00-00 32-00-70-89-31-06 No Hit
DES-3200-28P:admin#”
16-20 delete cfm linktrace
Description
This command is used to delete the stored link trace response data that have been initiated by the
specified MEP.
Format
delete cfm linktrace {[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> |
ma_index <uint 1-4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
Parameters
md - (Optional) Specify the maintenance domain name.
<string 22> - Enter the maintenance domain name her. This name can be up to 22 characters
long.
md_index - Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must