D-Link X-STACK DES-3200 SERIES - Page 205

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
201
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure dhcp_relay option 82:
DES-3200-28P:admin#config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DES-3200-28P:admin#config dhcp_relay option_82 check disable
Command: config dhcp_relay option_82 check disable
Success.
DES-3200-28P:admin#config dhcp_relay option_82 policy replace
Command: config dhcp_relay option_82 policy replace
Success.
DES-3200-28P:admin#config dhcp_relay option_82 remote_id user_define “D-Link L2
Switch”
Command: config dhcp_relay option_82 remote_id user_define "D-Link L2 Switch"
Success.
DES-3200-28P:admin#
20-7 config dhcp_relay option_82 circuit_id
Description
This command is used to configure the circuit id of DHCP relay agent information option 82 of the
Switch.
Format
config dhcp_relay option_82 circuit_id [default | vendor1]
Parameters
default – Specify the cirecuit id of DHCP relay agent to default.
vendor1 - Specify the cirecuit id of DHCP relay agent to vendor1.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.