D-Link X-STACK DES-3200 SERIES - Page 206

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
202
Example
To configure the circuit ID as default:
DES-3200-28P:admin#config dhcp_relay option_82 circuit_id default
Command: config dhcp_relay option_82 circuit_id default
Success.
DES-3200-28P:admin#
20-8 enable dhcp_relay
Description
This command is used to enable the DHCP relay function on the Switch.
Format
enable dhcp_relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DHCP relay function.
DES-3200-28P:admin#enable dhcp_relay
Command: enable dhcp_relay
Success.
DES-3200-28P:admin#
20-9 disable dhcp_relay
Description
This command is used to disable the DHCP relay function on the Switch.
Format
disable dhcp_relay
Parameters
None.