D-Link X-STACK DES-3200 SERIES - Page 207

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
203
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the DHCP relay function:
DES-3200-28P:admin#disable dhcp_relay
Command: disable dhcp_relay
Success.
DES-3200-28P:admin#
20-10 show dhcp_relay
Description
This command is used to display the current DHCP relay configuration.
Format
show dhcp_relay {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the IP interface name.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
If no parameter is specified , the system will display all DHCP relay configuration.
Restrictions
None.
Example
To display DHCP relay configuration: